鋁花紋板在加工完成以后面臨的就是運輸，那么如何安全運輸鋁花紋板，讓產品安全的達到目的地，這是個關鍵的問題。在這里為你大致講一下鋁花紋板的運輸。
After the aluminum pattern plate is processed, it is faced with transportation, so how to transport aluminum pattern plate safely, so that the product can safely reach the destination, this is a key problem. Here for you about the transportation of aluminum pattern plate.
鋁花紋板的運輸方式包括汽車、火車、輪船等各種交通運輸工具。
Transportation mode of aluminum pattern plate includes cars, trains, ships and other transportation vehicles.
在運輸過程中，不準將鋁花紋板與活性化工產品及潮濕材料混裝，同時應保持車廂、船倉干爽、清潔、無污染。鋁花紋板的裝運最好采用封閉式車廂或船倉，也可以用敞車裝運，但在運輸過程中，一定用防雨、雪苫布蓋嚴、捆牢，確保包裝箱及鋁花紋板產品內不會進入水、雨、雪。
In the transportation process, it is forbidden to mix aluminum pattern plate with active chemical products and wet materials, and at the same time, it should keep the carriage and ship compartment dry, clean and pollution-free. It is best to use a closed compartment or a ship warehouse for the shipment of aluminum pattern plates, or an open car for shipment. However, in the transportation process, it must be covered and bundled tightly with rainproof and snow tarp to ensure that water, rain and snow will not enter the packing boxes and aluminum pattern plate products.
鋁花紋板的存放環境和運輸環境一樣清潔、干燥、沒有污染物，因為鋁花紋板屬于有色金屬，如果與水接觸以后會產生氧化反映，這樣就破壞掉了表面，導致表面質量受到影響，所以一個干燥的環境是存放鋁花紋板的基本條件。
The storage environment of aluminum pattern plate is as clean, dry and free of pollutants as the transportation environment. Because aluminum pattern plate is a non-ferrous metal, if it contacts with water, it will produce oxidation reaction, which destroys the surface and affects the surface quality. Therefore, a dry environment is the basic condition for storing aluminum pattern plate.
中轉倒裝時，鋁花紋板建議存放在倉庫內，如存放在簡易庫房或露天存放，須用防雨、雪苫布蓋嚴、捆牢，同時下層的包裝箱應墊高，墊高應不小于100mm，包裝箱及井字架鋁箔卷的吊運、裝卸應輕拿輕放，以免損壞包裝箱及鋁箔。
In case of reverse shipment, it is recommended that the aluminum pattern plates be stored in the warehouse. If stored in a simple warehouse or in the open air, they should be covered with rain proof and snow tarp and tied securely. Meanwhile, the lower packing boxes should be padded with a cushion height of no less than 100mm.
雖然在包裝車間中已經做出了相對于的緊固，防潮包裝與措施，但是在運輸過程中要是要加蓋雨布，避免因為天氣原因導致的鋁花紋板包裝進水，同時裝卸過程中避免磕碰，讓鋁花紋板安全的運輸到用戶手中。
Although relative fastening and moisture-proof packaging and measures have been made in the packaging workshop, in the process of transportation, if you want to cover the rain cloth, avoid the water in the packaging of aluminum pattern plate caused by the weather, at the same time, avoid bumping in the process of loading and unloading, so that the aluminum pattern plate can be safely transported to the hands of users.
所以，對于許多鋁花紋板用戶以及經銷商而言，無論是在鋁花紋板運輸的過程中或者購進鋁花紋板以后存放時，都應該注意一下。更多注意事項的了解就來網站www.www032378.com咨詢吧。
Therefore, for many aluminum pattern plate users and dealers, whether in the process of aluminum pattern plate transportation or after the purchase of aluminum pattern plate storage, should pay attention to. For more information, please visit www.www032378.com.
